golf 56 - nearside headlight not working - replaced bulb
Discussion
I have a 56 golf plus (not all that exciting but better than previous citroen xsara) and the headlight warning light on dash recently came on. Then realised that the nearside dipped beam light (h7 bulb) was not working. So I have...
1. replaced the bulb - not working.
2. then tried another bulb (pack of two) - still not working.
3. put one of the new bulbs in the drivers side - it works there.
4. swapped the two 40amp headlight fuses (r26/r27) - either fuse works with drivers side headlight.
5. noticed that the nearside bulb fitting had some burnt on black stuff on one of its contacts. So used a small piece of sandpaper and small screwdriver to remove the black residue - has not helped either.
Is it possible when the bulb blew (and a high voltage occurs) that the black residue is the result of a connection burning out?
I can't see into the nearside headlight bulb fitting as the accessibility does not allow line of sight.
Any thoughts?
Off to garage next.
Stupot.
1. replaced the bulb - not working.
2. then tried another bulb (pack of two) - still not working.
3. put one of the new bulbs in the drivers side - it works there.
4. swapped the two 40amp headlight fuses (r26/r27) - either fuse works with drivers side headlight.
5. noticed that the nearside bulb fitting had some burnt on black stuff on one of its contacts. So used a small piece of sandpaper and small screwdriver to remove the black residue - has not helped either.
Is it possible when the bulb blew (and a high voltage occurs) that the black residue is the result of a connection burning out?
I can't see into the nearside headlight bulb fitting as the accessibility does not allow line of sight.
Any thoughts?
Off to garage next.
Stupot.
Ah interesting.
Local garage confirmed that the black burnt stuff I had found was the contact burning out. He said I need a new headlight unit. Maybe you had the same problem.
Now where did you get the headlight unit from?
Do you use breakers on the internet?
And did you fit yourself? Or not worth bothering - get garage to fit?
thanks,
Stuart.
Local garage confirmed that the black burnt stuff I had found was the contact burning out. He said I need a new headlight unit. Maybe you had the same problem.
Now where did you get the headlight unit from?
Do you use breakers on the internet?
And did you fit yourself? Or not worth bothering - get garage to fit?
thanks,
Stuart.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff




