2008 A6 can't access contact list via bluetooth
2008 A6 can't access contact list via bluetooth
Author
Discussion

996GT2

Original Poster:

2,649 posts

241 months

Thursday 13th January 2011
quotequote all
I picked up our 2008 A6 Avant just before Christmas and something that's been annoying me since is that the phone system doesn't seem to be picking up the phonebook. The 2007 A4 I traded for it managed this automatically so I'm guessing that it's something that can be fixed/setup rather than an incompatibility between the car and my phone.

I've tried all of the options on the phone settings to import the address book but it's just not working. My phone is a Nokia 5230 and it's the standard factory A6 phone system. Any help or ideas appreciated.


Silverbullet767

11,385 posts

237 months

Thursday 13th January 2011
quotequote all
If you got it from an Audi dealership take it back for a software upgrade.

Vee

3,109 posts

265 months

Thursday 13th January 2011
quotequote all
Do you have lots of text messages stored. I know it's not the same manufacturer but my BMW never bought in all contacts until I deleted all the old texts.

UVB

557 posts

224 months

Thursday 13th January 2011
quotequote all
I had similar issues with my old Nokia with my 2006 A6. Ended up curing it by getting the RSAP adaptor eg:

http://cgi.ebay.co.uk/audi-Bluetooth-Remote-SIM-/1...

It doesn't always work perfectly; sometimes it will drop the connection a couple of mins after pairing (even mid-call) but will usually pick it up again a couple of mins later and is then fine.

It does read the sim to access all your contacts, although I've found it better to just import them all into the car as they can be accessed a lot faster.

There are some much more significant benefits though; namely the RSAP. Assuming your Nokia supports RSAP (most do) it will put the phone into standby mode and routes your signal through the car aerial. I noticed significantly better signal strength with this - could never get a signal on the phone at my previous house but as soon as I sit in the car I'd get 3 out of 4 bars from the Audi.

Then I went and changed phone and forgot to get one with RSAP...duh!

As yours is a newer car though you may find that the software update mentioned above might cure your problems.

blueg33

47,025 posts

255 months

Thursday 13th January 2011
quotequote all
I have a lot of contacts on my Blackberry, and I find that when I first connect the new phone with all the contacts it takes a good hour for the car to download them. After the first time it only takes about 5 minutes.

(2007 A6 with MMI High etc)

As othyers have said though take it toa dealer for software. Depending on the month, if its a 2008 its still under warranty regardless of where you bought it and most dealers will sort it for you.


996GT2

Original Poster:

2,649 posts

241 months

Thursday 13th January 2011
quotequote all
UVB said:
I had similar issues with my old Nokia with my 2006 A6. Ended up curing it by getting the RSAP adaptor eg:

http://cgi.ebay.co.uk/audi-Bluetooth-Remote-SIM-/1...

It doesn't always work perfectly; sometimes it will drop the connection a couple of mins after pairing (even mid-call) but will usually pick it up again a couple of mins later and is then fine.

It does read the sim to access all your contacts, although I've found it better to just import them all into the car as they can be accessed a lot faster.

There are some much more significant benefits though; namely the RSAP. Assuming your Nokia supports RSAP (most do) it will put the phone into standby mode and routes your signal through the car aerial. I noticed significantly better signal strength with this - could never get a signal on the phone at my previous house but as soon as I sit in the car I'd get 3 out of 4 bars from the Audi.

Then I went and changed phone and forgot to get one with RSAP...duh!

As yours is a newer car though you may find that the software update mentioned above might cure your problems.
Cheers for this. After reading around it looks like my car has the Phone Prep Low - which means it doesn't do all the fancy RSAP stuff. Hopefully this adapter should solve it.

I'll ask Audi to price it up when it's in next week having the scratches repaired that their 'technician' put on it!



UVB

557 posts

224 months

Thursday 13th January 2011
quotequote all
996GT2 said:
After reading around it looks like my car has the Phone Prep Low - which means it doesn't do all the fancy RSAP stuff. Hopefully this adapter should solve it.
Yes it will solve it; mine was prep low too. Found this on a 2009 accessories price list I had on my PC; I guess it will have gone up a little from £300 now if only due to VAT. "Fitting" wise, it just plugs into the socket in the armrest.

Audi A6/Allroad (2005-) Accessories.
• Bluetooth Remote SIM Access Profile (rSAP) cradle adaptor
The Bluetooth Remote SIM Access Profile (rSAP) cradle adaptor is an enhancement of
the factory fitted option "Mobile phone preparation - Low". It enables mobile phone
handsets to connect via Bluetooth Remote SIM Access Profile (rSAP) in the same way
as handsets connect to the factory fitted option "Mobile phone preparation - High".
The Bluetooth rSAP adaptor is fitted to the same connection as all other adaptor
cradles (either on the dashboard or in the front centre armrest). The mobile handset
is then connected to the rSAP cradle via Bluetooth. When handsets are connected,
the cradle enables the use of the external GSM car antenna and deactivates the
handset antenna in order to minimise GSM radiation in the car and handset battery
consumption. The handset is put into standby mode so battery power drain is
minimal.
Once connected, the cradle connects to the handset automatically and details of up
to four handsets can be saved. Only handsets with Bluetooth rSAP functionality are
compatible with this cradle. Details of mobile handsets that are compatible with rSAP
can be found on Audi Desktop.
Customer Benefits
- The rSAP cradle adaptor is flexible so can be used with a variety of different
handsets. This makes it future proof for compatibility with new handsets
- “Mobile phone preparation – Low” already has a Bluetooth connection but this only
operates in a mode called “Hands Free Profile”. This means that although calls can be
made and received using the car, the phones antenna and battery are operating at
full capacity when making and receiving calls. The rSAP cradle adaptor uses the cars
external antenna and power supply to make and receive calls which improves call
quality and reduces handset battery consumption.
£300.00 including VAT and fitting

UVB

557 posts

224 months

Thursday 13th January 2011
quotequote all
Oh I should add that despite what it suggests above, non-Rsap phones will still be able to connect and function normally, but naturally won't be able to use Rsap.