audi a6 3.0 tdi injector
Discussion
got a a6 55 plate 3.0 tdi got a misfire on 1 cylinder no one can test the injectors there the bosch .....115 injector.you increase the revs by 20/50 rpm it goes or put the aircon on.took it back to where i brought it from and its been in a garage now for 3 weeks now its at audi stil no joy, no codes coming up. i keep telling them its the injector tip its not spraying the fuel properly and or its dripping does anyone no how to find out which 1 it could be or shine any light on this i'm getting XXXX with audi
White smoke from the exhaust system and juddering when the engine runs at idle speed for some time - V6 TDI 2.7l / 3.0l TDI.
Technical background
Mechanical wear of the needle attachment of the injector leads to an increased fuel injection into the combustion chamber. The fuel is not completely burnt, which causes white smoke (unburnt fuel) or juddering when the engine runs at idle speed for some time.
This complaint occurs only on vehicles with more than 50,000 km.
Production change
Modified injectors from:
8E47A040360
4F37N026750
4EX7N004204
4L*7D049162
Measure
Try to reproduce the customer complaint so that it can be clearly assigned to this TPI. The following repair must only be carried out, if all the criteria (model/type, chassis number, engine/gearbox code, PR number(s), software version, code etc. ) match exactly. Otherwise this solution won't work and repeat repairs may be necessary. In such a case, we may reject the warranty claim and redebit the parts.
Read the measured value blocks 72 - 77.
3 values per measured value block appear there (for 300 bar, 600 bar, 1000 bar).
Should the values be higher than minus -45 ms (example - 60ms) or
on digit 2 be
higher than minus -15 ms (e.g. 20ms),
the needle attachment is worn and the injector is incorrect. To avoid repeat repairs, replace all 6 injectors.
>>>> Observe the algebraic sign (minus) in measured value block 72-77 !!!!! <<<<<
Warranty accounting instructions
Service number/damage code/manufacturer: 2340/010
Technical background
Mechanical wear of the needle attachment of the injector leads to an increased fuel injection into the combustion chamber. The fuel is not completely burnt, which causes white smoke (unburnt fuel) or juddering when the engine runs at idle speed for some time.
This complaint occurs only on vehicles with more than 50,000 km.
Production change
Modified injectors from:
8E47A040360
4F37N026750
4EX7N004204
4L*7D049162
Measure
Try to reproduce the customer complaint so that it can be clearly assigned to this TPI. The following repair must only be carried out, if all the criteria (model/type, chassis number, engine/gearbox code, PR number(s), software version, code etc. ) match exactly. Otherwise this solution won't work and repeat repairs may be necessary. In such a case, we may reject the warranty claim and redebit the parts.
Read the measured value blocks 72 - 77.
3 values per measured value block appear there (for 300 bar, 600 bar, 1000 bar).
Should the values be higher than minus -45 ms (example - 60ms) or
on digit 2 be
higher than minus -15 ms (e.g. 20ms),
the needle attachment is worn and the injector is incorrect. To avoid repeat repairs, replace all 6 injectors.
>>>> Observe the algebraic sign (minus) in measured value block 72-77 !!!!! <<<<<
Warranty accounting instructions
Service number/damage code/manufacturer: 2340/010
car still juddering took it to a independent garage put lap top on within 30 secs he told me right hand side engine mount sensor has gone replaced this car is now picture perfect all the money spent at audi what toxxxxers couldn't find what was wrong with it name and shame audi stock......
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff