Griff ride heights & alignment settings.

[TVR Dummy]

I've just finished my front wishbone refurb and want to check the ride height of my Precat Griff. I have standard Gaz shocks fitted all round. Can anyone point me in the right direction?

I will be getting a full geometry set up done soon, just want to get things in the right range so I can get the car back on the road.

[Ant.]

aim for about 145mm at the corner of the front wishbone

[Bluebottle]

and make sure the rear is 1/2 inch higher than the front

[roseytvr]

When Trackvroad did mine, boy and what a difference it made too, the ride hight to the wing above the wheel through the middle was 620mm front and 645mm rear. Set up for road use.
HTH

[Torquemada]

Ant. said:

aim for about 145mm at the corner of the front wishbone

Wishbone or outrigger??

[Ant.]

Torquemada said:

Wishbone or outrigger??

My mistake, outrigger