Alarm / immobiliser options ?

[lazyitus]

Currently have a Meta M99T (I think it's an M99T) which appears to be knackered.

I've only had it about 6 years, replacing the other Meta which went wrong previously.

I went to the car at the weekend and it was as flat as a pancake. I don't know if this was caused by the alarm or not but I ended up trickle charging for a couple of days.

Now there is power back to the car, the fuel pump won't prime when I go to start it up.

The alarm light on top of the dash seems to be OK but the override key bit in amongst the wirey mess in the footwell is not flashing at all.

I suspect the alarm/immobiliser is up the creek again.

What are the best options?

Replace with another Meta or is it as easy to get a different type of alarm/immob rigged up?

Thanks in advance.

[black and green]

I took out the Gemini alarm and immob from my griff and fitted a Toad on instead. Works fine and gives remote boot release too - - was £100 ish brand new from ebay and took a lazy 6 hours to complete.

[lazyitus]

Thanks, B&G !

[dumbfunk]

I've had great service from Carl Baker who's probably the authority on TVR alarms

http://www.tvruk.tv/www.tvruk.tv/index.html

[Keithyboy]

dumbfunk said:

I've had great service from Carl Baker who's probably the authority on TVR alarms

http://www.tvruk.tv/www.tvruk.tv/index.html

Carl installed a complete new alarm in my Griff recently and did a fine job. He really knows his stuff and is THE man for TVR alarms. You will also get the boot release button on your re-worked ignition key too

[JamesK]

+1. No probably about it, Carl is THE man for TVR alarms/immobilisers etc. Give him a call.

[lazyitus]

Great - thanks. Just had a chat to Carl so hopefully on the start of the road to resolving the issue.