Shine a light

[V8Bart]

Winter job number 1


Need to replace the bulbs and going to use LED's to save doing the job again. I know there have been a few threads covering this but I seem to have missed anyone posting details on the little push fit ones?

Number 1 is a bayonet fit 24mm long 9mm wide and 10mm bulb glass need x6 of these, Temp-Oil-Fuel-Clock-Power-Speedo.
Number 2 is a push fit 24mm long 10mm wide 15mm blulb glass need x2 of these, Rev counter.
Number 3 is a tiny push fit 18mm long 5mm wide 10mm bulb glass x2 for trip on speedo.

1 and two seem to be
UBA91W (233) BA9 is model for Number 1
501/194/T10 is model for Number 2

But what on earth is number 3? please can anyone help. I could just buy std leds and match up with resistors like I did for the info panel with blue leds but don't want to remove the bulb plug if I can help it.

Cheers guys.

[scaundle]

Hi,

I replaced mine with ones I found at http://uk.rs-online.com/web/p/products/655-9687 after many hours of looking!

Regards

Steve

[V8Bart]

Thanks for the help Steve.
Picked some L.E.D's up local after finding on ebay, hope the info helps some one.

No1 are 233
http://www.ebay.co.uk/itm/320795840896?ssPageName=...
No2 are 501
http://www.ebay.co.uk/itm/310359392955?ssPageName=...
No3 are 286
http://www.ebay.co.uk/itm/310359394518?ssPageName=...

all you need is the 3 digit number, the id of the bulb holes is 12mm but tapers smaller so 11mm leds don't fit all the way down inside, but tacked the plugs in place with a little hot glue.
The tiny bulbs are not for the trip but for oil and battery warning lights on the speedo.
Looks like this now

[Hoover.]

well that hardly took all winter

looks good though..... maybe I should do something ?