Reverse Light Switch
Reverse Light Switch
Author
Discussion

Northern_Paul

Original Poster:

328 posts

267 months

Sunday 15th August 2004
quotequote all
Can anyone tell me where the switch/actuator for the reverse light is situated on the SD1 gearbox. Hoping that it can be accessed from below the car as I don't want to take out the lower console/fishtail if I can help it!

Thanks

NP

JoolzB

3,549 posts

278 months

Sunday 15th August 2004
quotequote all
I can't help myself but remember this from a couple of weeks ago.

www.pistonheads.com/gassing/topic.asp?t=114676&f=9&h=0

gingerprince

571 posts

270 months

Sunday 15th August 2004
quotequote all
Mine's the T5 gearbox - ended up getting it fitted when I took the car in for service. The exhaust needed to be removed to access where it fits, didn't really fancy it myself!

griffter

4,143 posts

284 months

Monday 16th August 2004
quotequote all
Northern_Paul said:
Can anyone tell me where the switch/actuator for the reverse light is situated on the SD1 gearbox. Hoping that it can be accessed from below the car as I don't want to take out the lower console/fishtail if I can help it!

Thanks

NP


Paul, see post referred to by JoolzB. Yes you can get to it from underneath the car. It's on the driver's side of the gearbox, screwed into a plate under the selection mechanism, up the top of the box, near the back. From memory it's held in by a nut either side of the plate, each nut screwed on to the threaded shaft of the reverse light switch, and tightened up against the plate. To remove, use screwdrivers/spanners/mole grips - whatever fits! I ended up using spanners on spanners and all sorts. If you can loosen the nut on the underside of the plate, with a bit of luck you can get your fingers on the nut above the plate and hold it still whilst unscrewing the switch. Make it up as you go along, basically! I cleaned mine and WD40'd it, but when I looked at it it looked suspiciously similar to the ones for sale at a kit car show as 'Triumph Spitfire etc' for only £1.50!! When you put it back, only do it a nip past finger tight so you can adjust it/get it out next time....