Wiper tube plastic clippy thing
Discussion
FlipFlopGriff said:
One of ours has broken as it kept coming out of the hole in the wiper arm. The tube onow sticks some way off the arm and looks crap.
I know these will be freely available at minimal cost but does anyone know what they are or where to start looking.
Cheers all.
FFG
I tried but failed to source this part. In the end I bought a complete assembly, in fact I bought two coz one would have been odd.....
If you mean the clips that holds the thin u-shaped tube onto the wiper arm, I have just upgraded to a leven product that does away with this and looks and performs much better. It was £13.50 for the kit. As a result of this, I chucked the old assembly in the bin at the weekend. I will try to remember to fish it out tonight and you are welcome to the clips!
Jon H
Jon H
N17 TVR said:
[quote=seasider]
It must also be very very easy to fit....
That is also true, I know my limits.
FFG, the main reason I upgraded mine was that it never quite recovered from being savaged by a Fox.
quote]
Im sorry mate but I cant help rolling around with the thought of that since you told me about it, every time I see a fox on tv I think of the mauling your car got that morning.
regards
h
Cheers Paul. Sounds ideal. Never knew thay made such an item. My clips (as previously discussed) have also both busted, been meaning to get it sorted for ages. Also the holes in the tubes point in all sorts of weird directions - I usually end up squirting oncoming cyclists.
Edited to add thats it ordered and on its way. I presume fitting - like all leven products - is a doddle?
>> Edited by jam1et on Thursday 2nd September 14:33
Edited to add thats it ordered and on its way. I presume fitting - like all leven products - is a doddle?
>> Edited by jam1et on Thursday 2nd September 14:33
The kit comes with full instructions and a bottle of superglue (which comes in handy for many other jobs
), and is a doddle to fit.
It would be handy if they also enclosed black straight thro' pipe joints as early Griffs don't have a connector and the pipe needs to be cut and joined (at least mine didn't), I had to fit some ugly white 90 degree connectors from Halfrauds until I find the proper ones.
), and is a doddle to fit. It would be handy if they also enclosed black straight thro' pipe joints as early Griffs don't have a connector and the pipe needs to be cut and joined (at least mine didn't), I had to fit some ugly white 90 degree connectors from Halfrauds until I find the proper ones.
Gassing Station | Griffith | Top of Page | What's New | My Stuff