Worked over the weekend

[fresser]

Well, as I said I would. I fitted the ACT induction hoses at the weekend cleaned the air filter and fitted the new spark-plugs, HT Leads dizzy cap and ignition coil.

Now I can hear the car breathing... never noticed that she sucks so hard before.. (ooer!)

The ACT hoses were a little bit of a bugger to fit, a tight fit on the air-flow meter but not on the other ends... I must be lucky 'cos had no problems at the air-filter end as many have reported before... Just the AFM-Plenum hose was about 1.5inches too long...

Anyone got any tips on HT-lead routing? They all seem too close to heat sources... even using the supplied separators..?

Will be fitting the swannecks and sillicon water hose kit this weekend...

Oh forgot to say, cleaned the engine a bit, but have now found that the oil-filler neck leaks...????

[Northern_Paul]

fresser said:

Oh forgot to say, cleaned the engine a bit, but have now found that the oil-filler neck leaks...????

That's the auto-waxoyling mod!

[starmist]

Mine does too. Just a slight misting at the bottom of the metal neck.