Glove box keeps opening
Glove box keeps opening
Author
Discussion

srebbe64

Original Poster:

13,021 posts

266 months

Friday 1st October 2004
quotequote all
Does anyone else have the same irritation that every time you go over a bump (or accelarate hard) the glove box flies open? It drives me nuts. I had a look at the "hook mechanism" which, in their wisdom, TVR decided to use. Pethetic little thing (bit like trying to hadcuff terrorists with cotton). I can't believe the engineers could get so much right about the car and get this, very simple thing, wrong. I was considering super-gluing the damn thing shut - never use it anyway! However, has anyone got any more intelligent ideas?

neilmac

567 posts

291 months

Friday 1st October 2004
quotequote all
You can tighten the hinge bolts so that there is a lot of resistance when opening and closing it, or you can wedge it shut with some folded up paper or card, or you can replace the catch with a loft catch from B&Q!

I've just tightened my hinges and it works fine.

Neil

REESO

1,199 posts

280 months

Friday 1st October 2004
quotequote all
Try shuting it!

groucho

12,134 posts

275 months

Friday 1st October 2004
quotequote all
I've got no latch on mine at all. Just tight hinges, never falls open.

Grouch.

JoolzB

3,549 posts

278 months

Friday 1st October 2004
quotequote all
Got no problems either with mine. The male part of the latch was way out then closing the glove box due to the 2 being at different angles. I made an angled washer for the male part and all is now hunky.

Failing that either tighten the bolts to stop it opening or if you want a working one you could get the mod-wise kit.

Ballistic Banana

14,706 posts

296 months

Friday 1st October 2004
quotequote all
Mod-wise Kit Sorts it nicely and makes it secure with the roof off as it has a locking mechanism.

BB

moto

1,283 posts

282 months

Friday 1st October 2004
quotequote all
Simple, permanent fix & cheap. Get a match stick, cut a piece about 1cm long. Pull out the upper plastic catch and insert match stick in the clip. Push back in and .... sorted.

Did mine a year ago and never had a problem since.

hedgehopper

1,542 posts

273 months

Saturday 2nd October 2004
quotequote all
I have found that once you do manage to fix the catch you then can't open the lid without digging your fingernails into the PVC and risk damaging the surface, so perhaps tightening the hinges should not be overdone. I have been in touch with Mod-Wise recently (for a bonnet-stay kit) and have been told that due to other business pressures he is no longer supplying parts, so this I suppose would include the glove box mod.

lone granger

801 posts

272 months

Sunday 3rd October 2004
quotequote all
srebbe64 said:
Does anyone else have the same irritation that every time you go over a bump (or accelarate hard) the glove box flies open? It drives me nuts. I had a look at the "hook mechanism" which, in their wisdom, TVR decided to use. Pethetic little thing (bit like trying to hadcuff terrorists with cotton). I can't believe the engineers could get so much right about the car and get this, very simple thing, wrong. I was considering super-gluing the damn thing shut - never use it anyway! However, has anyone got any more intelligent ideas?



...as Sir Peter W would say -----hmmmm, aye -- they do that, dont they....

RichB

56,221 posts

313 months

Monday 4th October 2004
quotequote all
lone granger said:
...as Sir Peter W would say -----hmmmm, aye -- they do that, dont they....

Mine doesn't - never has done - when I bought the car they told me not to slam the lid shut as it damages the catch. I never have and it has worked perfectly. Rich...

>> Edited by RichB on Monday 4th October 10:13

topsparks

1,202 posts

276 months

Monday 4th October 2004
quotequote all
Rich,good to see your posting again, I take it you got rid of the boss !

JoolzB

3,549 posts

278 months

Monday 4th October 2004
quotequote all
RichB said:

lone granger said:
...as Sir Peter W would say -----hmmmm, aye -- they do that, dont they....


Mine doesn't - never has done - when I bought the car they told me not to slam the lid shut as it damages the catch. I never have and it has worked perfectly. Rich...

>> Edited by RichB on Monday 4th October 10:13

That's fine but you can't account for a passenger who knocks it open with their knee and then slams it shut as happened to mine smashing it. I now make sure that people don't touch and it's worked perfectly ever since.

RichB

56,221 posts

313 months

Monday 4th October 2004
quotequote all
topsparks said:
Rich,good to see your posting again, I take it you got rid of the boss !
Ha ha... just a few days respite, in fact I'm off to Bedfont Lakes in 30 mins for lunch with him... Rich...

lone granger

801 posts

272 months

Thursday 7th October 2004
quotequote all
srebbe64 said:
Does anyone else have the same irritation that every time you go over a bump (or accelarate hard) the glove box flies open? It drives me nuts. I had a look at the "hook mechanism" which, in their wisdom, TVR decided to use. Pethetic little thing (bit like trying to hadcuff terrorists with cotton). I can't believe the engineers could get so much right about the car and get this, very simple thing, wrong. I was considering super-gluing the damn thing shut - never use it anyway! However, has anyone got any more intelligent ideas?



Mice love Griff gloveboxes, so they have their uses... - as for the auto opening feature - just think how much extra you would have to pay on a Merc's options list to get that!!

andy43

13,148 posts

283 months

Thursday 7th October 2004
quotequote all
Try B&Q....





....a nice chunky padlock with some 3" coach bolts to attach the hasp/bolt to the dashboard and lid would work fine

riley 3

18 posts

272 months

Friday 8th October 2004
quotequote all
I had two catches break on me.
simple solution. Velcro , been fine ever since.

riley 3

18 posts

272 months

Friday 8th October 2004
quotequote all
I had two catches break on me.
simple solution. Velcro , been fine ever since.

riley 3

18 posts

272 months

Friday 8th October 2004
quotequote all
I had two catches break on me.
simple solution. Velcro , been fine ever since.

srebbe64

Original Poster:

13,021 posts

266 months

Friday 8th October 2004
quotequote all
Thanks Riley
Thanks Riley
Thanks Riley

david beer

3,982 posts

296 months

Saturday 9th October 2004
quotequote all
srebbe64

you really should get a central locking solenoid in the corner of the glovebox, connected to a supply that only allows it to open when the doors are unlocked and only when you press up with a certain force. You will however loose the "TVR Griff glovebox", sorry but one has to move on !