Looking for a roof panel

[V8BJC]

Hi All,
I am off on our annual European road trip in Sept heading for Spa for the 6 Hours. With the roof panel in the boot of a Griff there is surprisingly little space for too much else so I want to make a split roof. I do want to keep my existing roof panel for use most of the time but also have the split roof for when boot space is required.

Does anyone have a roof panel kicking about that they want to sell me or

Suggestions on where I may be able to buy a new panel.

The condition is not important as I will be getting it re-trimmed post cutting.

Brian

[TvrJohn]

Have a mould for making the one piece, interested ?

[V8BJC]

TvrJohn said:

Have a mould for making the one piece, interested ?

In the mould or you making one for me from the mould?

[rigga]

As in your other thread .....
http://www.cambria-cirrus.com/

[cavebloke]

rigga said:

As in your other thread .....
http://www.cambria-cirrus.com/

Seconded!

This is my first summer with mine and it's a fantastic piece of kit. Perfect for touring. The price sounds steep but it's a quality bit of kit.

[jimed]

I was wondering about the Cambria Cirrus roof and asked a friend who has one if I could have a look - looks Ok but when I sat in the car the metal tightening bars were right above my head and more improtantly almost touching which is not what I would want so no use for me. A split roof would be the best solution for me (so waiting to see what V8GRF comes up with).
(I'm about 6ft and like the seat back sat reasonably upright - easier on the old back.)
Jim

[V8BJC]

I want to be sorted for sept so don't think the S&D solution will be an option.

[Corky]

I'm 6"3 and the Cirrus works for me.

[V8 GRF]

V8BJC said:

I want to be sorted for sept so don't think the S&D solution will be an option.

They've started to make good progress. I tried fitting the new prototype single handly to a Griffith last week and it worked well.

Very simple locating system that will allow the roof to be fitted as a single panel.

[V8BJC]

V8 GRF said:

They've started to make good progress. I tried fitting the new prototype single handly to a Griffith last week and it worked well.

Very simple locating system that will allow the roof to be fitted as a single panel.

Hi, YHM

[black and green]

PM me if you still want a roof panel