Help!!!!!!
Help!!!!!!
Author
Discussion

arc controls

Original Poster:

58 posts

278 months

Tuesday 26th October 2004
quotequote all
I was working in the driveway on sunday when I noticed that all the indicator lights were illuminated on my car (not flashing)!!

The battery wasn't flat and the car started ok, the alarm/immobiliser wouldn’t work so I had to take the secret way in. I disconnected the battery and checked fuses and relays, reconnected the battery but the problem still persists....


Anyone experienced a similar problem??

Thanks in advance,

Rob

Hut49

3,544 posts

291 months

Tuesday 26th October 2004
quotequote all
Sorry can't help you but it would be a great idea to edit your post to remove the "helpful" advice!

Ballistic Banana

14,706 posts

296 months

Tuesday 26th October 2004
quotequote all
Hut49 said:
Sorry can't help you but it would be a great idea to edit your post to remove the "helpful" advice!





BB

Ballistic Banana

14,706 posts

296 months

Tuesday 26th October 2004
quotequote all
You must ahve a short somewhere, alarm prehaps may be the problem if thats not working too, have you tried re-setting it manually( with its Key if it has one).
Could be the relay too playing up.
Just a few of many possibilities


BB

arc controls

Original Poster:

58 posts

278 months

Wednesday 27th October 2004
quotequote all
Yeah sorry about that guys. Thanks for the help

starmist

1,052 posts

271 months

Wednesday 27th October 2004
quotequote all
Sounds like you've got a dodgy earth. If something that is 'on' can't earth, it will have a tendancy to back feed throgh another circuit that uses the same earth (such as your indicators).

For a good example, you must have followed a car at some time, that brakes and indicated and you have seem the brake lights pulsing as the indicator flashes.

Same thing.

shpub

8,507 posts

301 months

Wednesday 27th October 2004
quotequote all
Page 254 in the bible 2nd edition. Front earthing problem. Bad news the offending connection is under the rad

DustyC

12,822 posts

283 months

Wednesday 27th October 2004
quotequote all
Thats a clever place to put it.
Just like the wires that run under the rad.

arc controls

Original Poster:

58 posts

278 months

Thursday 28th October 2004
quotequote all
Thanks for the help.. I'll be investigating the problem at the weekend.

Will let you know the outcome

Rob

Ballistic Banana

14,706 posts

296 months

Thursday 28th October 2004
quotequote all
On mine before I had the new nose cone you couldnt get a normall size socket on it. It would have to be a slimline one as fowled on the Grp. If this happens another alternative is to cut a slot in the GRP just under the bolt so that you can get an open ended spanner on it with enough room in the slot to work the spanner.
When this was loose on mine it made the fuel guage read funny and teh lights and indicators would flicker intermitiantly.

BB

d8v8

26 posts

272 months

Thursday 28th October 2004
quotequote all
If you dont find the bunch of earths in the normal place, you may find them on the drivers side lower anti roll bar bolt as I did. I then had to take the radiator out to get to it