As above, on Supertires alignment ramp on Tuesday, she's got positive front camber, I fitted a new top ball joint and wishbone last year and set the camber " Negative" by eye, but their machine shows positive camber and the ball joint hits the wishbone !!
Wishbone inner edges need to be flared to accept the wider head on the modern balljoint. Easy done with an angle grinder etc, this will allow the ball joint to move further in and give you more neg
Hi Allan, yes looks like it's angle grinder time ! The near side top ball joint is identical in size and Steve had that one replaced in circa 2002. Caster Shim is at the front which I take it is correct ?
