Estorill Wheel Badges

[louvrehead]

May anyone help in sourcing 4 no TVR badges to replace my old knackered set ?

I had the wheels refurbished which look great, though the badges separately supplied to me by Central TVR don't fit. They are about 2mm too large in diameter. I'm looking for a set that sit in the recess not on the old badges which I'm guessing is the design principle behind the set I've received.

Thanks in anticipation.

V

[andy43]

I got a set off eBay - seller had a few different options on diameter so may be worth a look on there. Quality seems ok, resin domed, self adhesive etc.

[ronspeedsix]

Take a good look at the pics of new badges.
The tvr logo isn't always exactly as it should be, also different sizes of logo. And choose right diameter.
I bought a set and had to grind of a few tenths.

I posted this earlier with pics. Will try to find that later
I'll be back..

Ronald

[Englishman]

I recently fitted 57mm ones from:

http://www.ebay.co.uk/itm/360522680800?_trksid=p20...

But I'd suggest measuring the exact size you need as they can supply sizes from 35 to 110mm, including 57, 58 and 60mm, one of which I suspect will cover your needs.

[andy43]

Englishman said:

I recently fitted 57mm ones from:

http://www.ebay.co.uk/itm/360522680800?_trksid=p20...

But I'd suggest measuring the exact size you need as they can supply sizes from 35 to 110mm, including 57, 58 and 60mm, one of which I suspect will cover your needs.

That's the ones I got. Couldn't find em on eBay yesterday

[louvrehead]

Hi Andy

The OEM diameter is 57.5mm so 57mm would be good but apparently they dont supply these. May Try TVR Parts tomorrow.

Edited by louvrehead on Sunday 9th August 11:01

[ronspeedsix]

http://www.pistonheads.com/gassing/topic.asp?t=150...

as promised
Ronald