plug gaps

[bluezeeland]

What is the plug gap for NGK BPR6EIX plugs ?

[FlipFlopGriff]

Thought NGK's come pre set - not sure what gap mind but BPR6ES are set at the correct gap for a Griff.
FFG

[bluezeeland]

They all look set the same,yes (haven't got a feeler gauge handy, mind....) so probably correct, i'll will fit them coming Sat..

cheers !

[350zwelgje]

I always check the gap and never install plugs straight from the box!
Have come across a quite few that were not as printed on the box....

Think for most Rover V8 engines the gap is 0.8mm, also for iridium (that is what NGK have on their site and would trust that).
This is assuming you have a good coil. Bosch seems to be the recommended one by Mark Adams.

Rob

[bluezeeland]

Hi Rob,

Coil is Bosch, leads will be changed for new in one go....

0.8 is for 7', these are 6', I will establish the average factory setting and adjust all to that, install and see what the results are

cheers,

Frank

[bluezeeland]

Just noted 6' are 0.8 too, txs Rob !