Carbon cannister
Discussion
Some owners have removed the cannister but you will need to:
1. Remove the fuel line from the fuel tank filler neck, not forgetting to keep the roll over valve. See:
http://www.bertram-hill.com/replacing-the-fuel-lin...
2. Arrange another method for your fuel tank to vent to the atmosphere
3. Block the connection to the inlet manifold that the cannister exhausts to
4. Tidy up the electrical connector to the cannister from the ECU.
1. Remove the fuel line from the fuel tank filler neck, not forgetting to keep the roll over valve. See:
http://www.bertram-hill.com/replacing-the-fuel-lin...
2. Arrange another method for your fuel tank to vent to the atmosphere
3. Block the connection to the inlet manifold that the cannister exhausts to
4. Tidy up the electrical connector to the cannister from the ECU.
Gassing Station | Griffith | Top of Page | What's New | My Stuff


