Removing Headlamp Shroud?
Discussion
The shroud (I take it you mean the clear plastic cover)
is screwed to the "pod" itself.
You may be able to release the pod from the bracket, cut the sealant and then use a small screwdriver to undo the shroud, however once you have reached that stage it isnt that much more work to get it out all together.
is screwed to the "pod" itself.
You may be able to release the pod from the bracket, cut the sealant and then use a small screwdriver to undo the shroud, however once you have reached that stage it isnt that much more work to get it out all together.
Not related but worth mentioning.
Dont try and yank the Handbrake up to high and towards the driver(which is easy to do as it is positioned over on the left) as this can brake/shear a tiny bolt that holds it square under the transmission Tunnel.... Been their done that got the skinless knuckles
BB
Dont try and yank the Handbrake up to high and towards the driver(which is easy to do as it is positioned over on the left) as this can brake/shear a tiny bolt that holds it square under the transmission Tunnel.... Been their done that got the skinless knuckles
BB
Gassing Station | Griffith | Top of Page | What's New | My Stuff




Wrong Thread
how'd that happen
pi$$ takers you lot