Targa panel to window gap?

[pjac67]

Had my Griff since Sunday but only put the roof on yesterday to wash car. Had to close door with a folded towel on the top of the window due to big gap between targs seal and top of window (increasing to 15mm at rear). Can't recall as big a gap on my other 2 Griffs? Any ideas please?
Thanks in advance, Paul.

[Wildfire]

Not sure about others but mine's a good 10mm off on the driver's side.

[seasider]

You will find an adjusting screw inside the door. When the window is fully down you can get a screw driver on it and adjust away

[Wildfire]

Cool. Another job for winter.

[pjac67]

Thanks Seasider - p309 of The Bible! (2nd edition) - was looking in the wrong place!

[antonyj]

When I put my roof on , I line up the pin in the middle of the scrren channel.
However this always leaves a gap at the top of the drivers window.

Try pushing the roof towards the drivers door before before raising the roof supports.
This evens things up a bit.

Works for me

[Wildfire]

Will this help the whistling sound I get from the passenger side door. Seems to be coming from the bottom of the metal window frame.