Griff remote key fob,
Discussion
Having recently become a smiling Griffith owner I have a question, one of my remote key fobs works. Unfortunately the other doen't. I have been told they are supplied by META, however with investigation I have been told that TVR used a speacial software so you can't get a new fob. Has anyone else experienced this or have any good ideas. Cheers
cre55y said:
Having recently become a smiling Griffith owner I have a question, one of my remote key fobs works. Unfortunately the other doen't. I have been told they are supplied by META, however with investigation I have been told that TVR used a speacial software so you can't get a new fob. Has anyone else experienced this or have any good ideas. Cheers
Speak to Carl at Car & Bike Installations for all things Meta alarm, he'll sort you out.
www.tvruk.tv/
0772 072 3407
if you are talking about the black plastic tvr fob with the round push button in the middle of one side and one fob works and the other doesn't then the fob mechanism is probably duff.
The plastic push buttons are notorious for transferring too much finger pressure on the micro switch and the switch fails.
Carl will sort you out - I suspect he will suggest you have a Meta fob which has a rubber push button which softens the load on the micro switch when you press it.
editted to say: definitely check the batteries first (2 in each fob) like rich B says.
>> Edited by Dutchone on Thursday 6th October 13:31
The plastic push buttons are notorious for transferring too much finger pressure on the micro switch and the switch fails.
Carl will sort you out - I suspect he will suggest you have a Meta fob which has a rubber push button which softens the load on the micro switch when you press it.
editted to say: definitely check the batteries first (2 in each fob) like rich B says.
>> Edited by Dutchone on Thursday 6th October 13:31
Gassing Station | Griffith | Top of Page | What's New | My Stuff


