WHAT GEARBOX OIL ?????????
Discussion
Hi all. Could you tell me what gearbox oil to use in the Rover box. The manual says "S.S.80" but this does not mean anything to me and there is no plate on the car (V8s) .It is used for heavy track use and I am going to change it after every season (not sure if that is necessary or not but it can't hurt). Again I am assuming that Mobil would be the best but don't know what to ask for.
Cheers.
Ps don't shout at me for putting it on this forum but there are more Rover based gearbox cars on here.
Cheers.
Ps don't shout at me for putting it on this forum but there are more Rover based gearbox cars on here.
rnd said:
Hi all. Could you tell me what gearbox oil to use in the Rover box. The manual says "S.S.80" but this does not mean anything to me and there is no plate on the car (V8s) .It is used for heavy track use and I am going to change it after every season (not sure if that is necessary or not but it can't hurt). Again I am assuming that Mobil would be the best but don't know what to ask for.
Cheers.
Ps don't shout at me for putting it on this forum but there are more Rover based gearbox cars on here.
I use Castrol SMX-S fully synthetic, had it in the box for two years now.
Fred
Hymmmm, None the wiser, Does the number mean the "thickness" of the oil.Spoke to a friend (jigs)and his Griff manual says mobil ATF220 (it has the Rover box), does anyone have any views on this. Did get it changed at the begining of the year and have noticed that when car is cold it is very hard to get into gear (not sure what was put into it). My Chim has ATF oil in it (why do TVR like the automatic stuff when it is not an auto box)
My Griff ('94 500, SD1 box)plate states gearbox oil should be ATF220. Last Service I changed it to Castrol SMX-S because I'd read that this was nowadays recommended for this box - but I've recently changed back to ATF220 because I was not happy with the feel of the gearchange - I am much happier with ATF220. I found that with SMX-s you could very often feel the gears meshing (although it never "crunched"
as you changed up - especially from 1st to 2nd. This suggests to me that the synchro-mesh isn't operating as it's supposed to.
as you changed up - especially from 1st to 2nd. This suggests to me that the synchro-mesh isn't operating as it's supposed to.Gassing Station | Griffith | Top of Page | What's New | My Stuff





