Discussion
hi.everyone can someone please help me i am pulling my hair out as i cant closed boot on griff it seem to happen after i washed the car i went to press button nothing happened checked fuses found blow fuse ,replaced fuse try again pop fuse went again also all instraments on dash not working i left it 1 day as of work went back try again put new fuse in again everything on dash fine but boot release not working what i am woundering is there an inline fuse between the button and the boot and if so can someone please tell me where to find it if not then it could mean dash out to look at switch many thanks in advance paul.
That sounds more mechanical - a problem with the boot catch itself or the release wire. Have you emptied the boot? I had an embarassing experience when the boot would not close - my briefcase was resting against the release mechanism!
If you use the search facility there was a thread on this some months ago, or it may be in FAQs. Good luck!
Alan
If you use the search facility there was a thread on this some months ago, or it may be in FAQs. Good luck!
Alan
Right, are you saying it shuts proerly but won't latch closed i.e. the latch hook isn't flipping over or... are you saying that the latch has come across and the lid won't shut down fully? When you press the open switch does the solonoid work i.e. you'll hear the click as it mvoes the hook across? If so then assume it's mechanical in which case it sounds like the latch needs resetting. Rich...
It was my thread. I had same problem after filling with petrol. In my case the solderless nipple on the delatch Bowden Cable (from the solenoid) had slipped a couple of millimetres along the cable. This had the effect of allowing the delatching lever to move into a position where it wasn't cocked properly and therefore wouldn't latch on to the boot lid peg. Trial and error by moving the nipple back into a lever cocking position sorted the mystery.
Gassing Station | Griffith | Top of Page | What's New | My Stuff




