Perspex headlight visors ?
Perspex headlight visors ?
Author
Discussion

Llanelli-rob

Original Poster:

533 posts

253 months

Wednesday 19th April 2006
quotequote all
Hi All,

Griff is off into the painshop next week for a full blowover,my perspex visors are showing signs of fine crazing so this will be an ideal time to renew them.

Are these TVR only supply? and does anyone have an idea of the cost per pair please?

Also are they available with a smoke tint? OR rather than brand new does anyone have a pair kicking around they would like to sell?

Many thanks
Rob

griffter

4,143 posts

284 months

Wednesday 19th April 2006
quotequote all
They're TVR only and about £65 each.
I tried to find a driver's side clear about 3 months ago and driver's side clear was on back order, out of stock everywhere I tried. I ended up with a smoked pair.

Where are you going for the respray? Did you get the bonnet done already?

Seasider

12,728 posts

278 months

Wednesday 19th April 2006
quotequote all
Hi Rob,
You might want to think about this

Might help spotting those sheep on the unlit roads

Sorry about the reference to sheep

Llanelli-rob

Original Poster:

533 posts

253 months

Wednesday 19th April 2006
quotequote all
griffter said:
They're TVR only and about £65 each.
I tried to find a driver's side clear about 3 months ago and driver's side clear was on back order, out of stock everywhere I tried. I ended up with a smoked pair.

Where are you going for the respray? Did you get the bonnet done already?


A friend of a friend runs the bodyshop at our local Renault franchise and fortunately his company allow him to use their facillities for his own work,he called round last night and gave me a great price so its off in on the weekend.

He reckons there will be no prob's doing the bonnet either.

Where did you get the smoked pair from was it TVR and were they also £65 each?

Do I need to order direct from the factory?

Thanks
Rob

tvrinbfg

1,460 posts

313 months

Wednesday 19th April 2006
quotequote all
Peninsula make some copy ones which fit ok. Check with them (or they might have moved to TVRcarparts with the staff that moved).

Llanelli-rob

Original Poster:

533 posts

253 months

Wednesday 19th April 2006
quotequote all
Seasider said:
Hi Rob,
You might want to think about this

Might help spotting those sheep on the unlit roads

Sorry about the reference to sheep


Thanks Derek,

However I do not have any intention whatsoever of using the car at night(though on the very rare occasion it might happen)!

Its purely a Sunny Sunday runabout if we get any Sun this yr!!

Stunning job though looks very nice

Ref the sheep (we s**g em you eat em!)

Seasider

12,728 posts

278 months

Wednesday 19th April 2006
quotequote all
Llanelli-rob said:
Stunning job though looks very nice

Thank you

Llanelli-rob said:
Ref the sheep (we s**g em you eat em!)




Llanelli-rob

Original Poster:

533 posts

253 months

Wednesday 19th April 2006
quotequote all
tvrinbfg said:
Peninsula make some copy ones which fit ok. Check with them (or they might have moved to TVRcarparts with the staff that moved).


James,

Thanks mate,just ordered with TVRcarparts who have the smoke tint in stock and I'll get them tomorrow

For info if anyone else interested price is £57.10 each plus the dreaded vat.

Thanks
Rob

Seasider

12,728 posts

278 months

Wednesday 19th April 2006
quotequote all

Small tip,

Had to do it on mine. If you look at the pics i had nothing covering the rear of the light assembly (standard is only a flat piece of rubber).

If you know a Chimp owner and can borrow/perloin a couple of shower caps make a small hole for the wires and cable tie to stop anything getting in.
The elasticated part fits snugly over the rear of the pod stopping any crap getting in your nice clean pod's

>> Edited by Seasider on Wednesday 19th April 10:47

Llanelli-Rob

Original Poster:

533 posts

253 months

Wednesday 19th April 2006
quotequote all
Seasider said:

Small tip,

Had to do it on mine. If you look at the pics i had nothing covering the rear of the light assembly (standard is only a flat piece of rubber).

If you know a Chimp owner and can borrow/perloin a couple of shower caps make a small hole for the wires and cable tie to stop anything getting in.
The elasticated part fits snugly over the rear of the pod stopping any crap getting in your nice clean pod's

>> Edited by Seasider on Wednesday 19th April 10:47


Nice one Derek

Will pass that onto my sprayer who will be fitting and sealing
them.

Just posted a very recent pic on my profile (pre respray) Just goes to show you should never trust a photo as you would think looking at the picture that my current paintwork is pristine,eeeerm no!

>> Edited by Llanelli-Rob on Wednesday 19th April 10:55

Podie

46,649 posts

304 months

Wednesday 19th April 2006
quotequote all
Seasider said:

If you know a Chimp owner ... nice clean pod's



Blimey! Leave me out of this!

Seasider

12,728 posts

278 months

Wednesday 19th April 2006
quotequote all
Podie said:
Seasider said:

If you know a Chimp owner ... nice clean pod's



Blimey! Leave me out of this!


[announcement] Chimp owner admits to covering himself in plastic/rubber shocker !!!!!![/announcement]

griffter

4,143 posts

284 months

Wednesday 19th April 2006
quotequote all
Nice one. The smokes look better IMHO and don't seem to affect the headlamp brightness much.

mf68

199 posts

254 months

Wednesday 19th April 2006
quotequote all
Rob,
sorry for late reply but got mine from leven, smoked (long story but swapped them for clear with someone) was only around £95.00 for the pair delevered, if you need to get hold of some silkaflex i got mine from a boat company for £24.00 ish for 2 tubes delivered which i have the details at home if you need can post that tonight or email you , however 1 tube will be enough for the job just, agree with seasider about the shower cap made mine out of some duck hooding as the rubber had perished, probably the hardest part of the job is keeping the inside of the perspex clear and every time you wipe them they become static, ( will probably give the cat a no1 all over if i ever do it again)put them together in the house,

not sure which tvrcc region it was but i think it was griffsmith who put together a good report of how to do.

martin
sorry if long winded don,t get out much

griffsmith

331 posts

255 months

Wednesday 19th April 2006
quotequote all
Hi MF68 how did yours go, are you happy about the results?

Rob, try here www.warks-tvr.org.uk/index.php in the tech tips section hope its of use..

mf68

199 posts

254 months

Wednesday 19th April 2006
quotequote all
chris
every thing went fine cheers,thanks to the good advise from yourself, not being much of a gardener i used a medium sized button for the detailing around the join for a good result instead of the name stick, and was also suprised how easy it was to get the excess sealant of the next day with a blunt tool (plastic ruler) and just a normal house hold degreaser,
see you are going to the curry night at the growl will have to buy you that pint cheers,

rob
the web site for the sealant silkaflex 291 if you need it is www.force4.co.uk
was £9.95 a tube plus packaging

Llanelli-Rob

Original Poster:

533 posts

253 months

Wednesday 19th April 2006
quotequote all
Chris thanks for the link a good article that,maybe you should suggest that for BB to put up on the Griff pages

Martin my other passion being my fishing boat means I keep a stock of Sikaflex handy in my shed,but thanks all the same

PS nice cars chaps.

evolutionvalet

907 posts

249 months

Thursday 20th April 2006
quotequote all

Hi,

Why not try this..

[url]www.xpel.com/products/headlight.asp[/url]

If you have a look, they also have a video clip of a test of the film. It stopped a stone at over 100mph.....

Kevin