Indicators not working.

[kkayes]

Hi
I have removed and my dash (for re-veneer).

Now the indicators have stopped working.

The hazard switch still operates the indicators & the alarm flashes
them also -but the indicator switch on the steering column won't operate them!

Anybody got any ideas? Does anyone know the wiring for the indicator switch on steering column ?

[pjac67]

I think you need a new flasher unit (vauxhall part).

[shpub]

Pages 277 -279 in the bible.

[pjac67]

Just had my flasher unit replaced (old one burnt out) but still no indicators (hazards/alarm flash both work) - any ideas? Steve?
Many thanks in advance.

[dnb]

Silly things - like the fuses? Our fuse board wasn't wired up anything like the diagram in the manual - the fuse labeled "indicators" was connected to absolutely nothing... Took a little while to track this one down.

[pjac67]

Thanks DNB. New fuses, new flasher unit. Still no indicators. Any ideas folks?

[ATG]

I'd get the multimeter out and see if there was any voltage across the switches in the steering column stalk wotsit. Should be easy to identify which contacts are made/broken by moving the stalk up and down, and that'll tell you which wires to check for a voltage.

[pjac67]

Thanks ATG.