GRIFFITH 500 FRONT FOG
GRIFFITH 500 FRONT FOG
Author
Discussion

31 bebee

Original Poster:

4,724 posts

254 months

Tuesday 27th June 2006
quotequote all
Hi folks.

Can anyone tell me where I might get a front nr side fog light for my Griff 500?

Thanks for you help.

Bebee

bluebottle

3,498 posts

269 months

Tuesday 27th June 2006
quotequote all
Front fogs on a Griff?...do you do much driving at night?

barreti

6,689 posts

266 months

Tuesday 27th June 2006
quotequote all
I think he's trying to tell you the bottom lights are not fog lights, they are your high beam lights - no really they are!

Try searching through this forum for Driving Lamps and I'm sure you'll find something about them.
Brace yourself though, they aren't cheap.

bluebottle

3,498 posts

269 months

Tuesday 27th June 2006
quotequote all
sorry.....couldn't resist

31 bebee

Original Poster:

4,724 posts

254 months

Tuesday 27th June 2006
quotequote all
bluebottle said:
sorry.....couldn't resist


Mr Blue, looks like you drove at night without lights! That's quite a smash. Have you repaired her now? I don't as is happens do much night driving in the griff. The light is stone chipped and will fail an MOT, but I can't find a replacement.

Cheers.

Bebee

barreti

6,689 posts

266 months

Wednesday 28th June 2006
quotequote all

bluebottle

3,498 posts

269 months

Wednesday 28th June 2006
quotequote all
lol...yep it was at night to.

rodbloke

95 posts

258 months

Wednesday 28th June 2006
quotequote all
Not sure if its any help, but mine just got through an MOT with cracked/chipped driving lamp glass. I don't think it matters if the light beam itself isn't scattered...depends on the MOT tester though as well I guess.

simpo two

92,710 posts

294 months

Wednesday 28th June 2006
quotequote all
I didn't think high beam was an MOT issue, but may be wrong.

bluebottle

3,498 posts

269 months

Wednesday 28th June 2006
quotequote all
simpo two said:
I didn't think high beam was an MOT issue, but may be wrong.


I believe the guidelines for MOT centres are that; If it is fitted it must conform to the rules.

So if the lense is cracked or chipped within the area of the beam of light or is in a location that causes light to be defracted it should be a failure.

antonyj

5,254 posts

310 months

Wednesday 28th June 2006
quotequote all


What lamps are fitted at the moment?
I have some hella's ,but arent the 500's cibies?


Edited by antonyj on Wednesday 28th June 22:48

Ballistic Banana

14,706 posts

296 months

Wednesday 28th June 2006
quotequote all
Mine got through with a cracked Drivers light but with the amourfend holding it in place it may not look so bad... But saying that see my Caliper Q They passed the brakes too and look at them now

mollyhc

7 posts

257 months

Monday 10th July 2006
quotequote all
just had to buy one myself as i got gracked by a stone £70 from fernhursts but check the connections as i got sold spade ends but the originals were bullets

B16 RFF

883 posts

296 months

Monday 10th July 2006
quotequote all
Mine has passed several MOTs with cracked driving light/high beam lenses.

Paul.

PS They're not aligned very well either.

laz11

517 posts

276 months

Tuesday 11th July 2006
quotequote all
Mine also has passed MOT with both main beam lights cracked too!

jeboa

547 posts

290 months

Wednesday 12th July 2006
quotequote all
Hi,

Replaced mine a couple of months ago, see post here:

www.pistonheads.com/gassing/topic.asp?h=0&f=9&t=266986&p=1

BTW, I drove mine for a while with a cracked lens, then cr*$*^d myself when I heard a nasty clattering sound doing about 50MPH when the lens came apart and the glass shattered under the car. I wouldn't drive around with it like that for too long!

2 sMoKiN bArReLs

32,007 posts

264 months

Wednesday 12th July 2006
quotequote all
Srrebe....you are not alone!!!!!!!

2 sMoKiN bArReLs

32,007 posts

264 months

Wednesday 12th July 2006
quotequote all