Main beam Bulb removal

[Griffophenia]

Griffith 4.0 Precat

Hi any body know how to remove the bulb!! I can see 3 spring type clips holding the front glass on, do I remove these 0r do I attack from the rear!

Phil

(misplaced my Bible)

Edited by Griffophenia on Wednesday 16th August 11:51

[Slacey]

Remove from the rear IIRC.

[grif500]

Slacey said:

Remove from the rear IIRC.

Yup, small hatch in the wheel arch, held in place by a few screws and load and loads of silicon type stuff!

[Griffophenia]

grif500 said:

Slacey said:

Remove from the rear IIRC.

Yup, small hatch in the wheel arch, held in place by a few screws and load and loads of silicon type stuff!

Cheers chaps for that quick responce.

Phil

[Wildfire]

Be really careful you don't pop the light out whilst doing this from behind! I did took me ages to get it back in.

[simpo two]

And you a design/tech teacher as well!

[geoffvalenti]

grif500 said:

Slacey said:

Remove from the rear IIRC.

Yup, small hatch in the wheel arch, held in place by a few screws and load and loads of silicon type stuff!

Err..........isn't the light in the pod, accessible from the wheelarch the dipped beam one?

[richb]

Phil asked about the main-beam not the dipped-beam. Mine's a 500 not a 400 but I'm sure you don't access the main-beam through the wheelarch access panel. Surely it's just a case of reaching under the nose and removing the bulb from the rear of the (Cibie) lamp unit? Rich...

[grif500]

geoffvalenti said:

grif500 said:

Slacey said:

Remove from the rear IIRC.

Yup, small hatch in the wheel arch, held in place by a few screws and load and loads of silicon type stuff!

Err..........isn't the light in the pod, accessible from the wheelarch the dipped beam one?

D'oh!!!

Ok, in future I'll read the thread title before trying to be helpful.....

[Griffophenia]

richb said:

Phil asked about the main-beam not the dipped-beam. Mine's a 500 not a 400 but I'm sure you don't access the main-beam through the wheelarch access panel. Surely it's just a case of reaching under the nose and removing the bulb from the rear of the (Cibie) lamp unit? Rich...

Yes you are right Rich I did ask about Main Beam, you attack it from under the the nosecone after removing the wiremesh--Sorted!!

Phil