New fuse board wiring help

[golf bandit]

I am having to replace the fuse board of my 1995 griff and have purchased the Audi replacement fuse board from David Geralds. They have given my auto spark a sheet listing the changes required to do the change over.Items 1 to 6 are ok but item 7 states that White/Green in FRL moves to B50A. The problem I have is that on my fuse board there is no cable connected to FRL. Does any one know what it does or how we get around this? I also have the same problem with item 8. Red wire in ERS moves to K6 again there is no red wire in ERS to start with.

[toma500]

Hi there I,m no expert but was thinking that maybe the wires mentioned are for heated seats or air con , or something else that was an extra .

[mongoose]

golf bandit said:

I am having to replace the fuse board of my 1995 griff and have purchased the Audi replacement fuse board from David Geralds. They have given my auto spark a sheet listing the changes required to do the change over.Items 1 to 6 are ok but item 7 states that White/Green in FRL moves to B50A. The problem I have is that on my fuse board there is no cable connected to FRL. Does any one know what it does or how we get around this? I also have the same problem with item 8. Red wire in ERS moves to K6 again there is no red wire in ERS to start with.

K6 on my fuseboard map,connects to relay 6,terminal 58.
'K' is a set of 5 male pins on the rear of the board,the opposite side of which is the blank space which would have been relay position 3.Connector B doesn't have a terminal 50a,so i'm a bit confused by the reference codes your quoting.The big problem is that TVR did make changes throughout the years.I can talk you through the info i have if you like?If so,contact me through my profile,and i'll send you my phone no.