OZ wheel tool - URGENT
Discussion
Can any one lend me the tool to undo the centre cap....... EX girl friend has missed placed (was in bedroom for re engineering but she tieded up 
) and I need to get my wheels off to sort out leaking valves.
I promise return and all costs covered ..... I will use it get one made up for myself.
Cheers in adavance
Hoover
) and I need to get my wheels off to sort out leaking valves. I promise return and all costs covered ..... I will use it get one made up for myself.
Cheers in adavance
Hoover
Not sure if its the same as the wedge OZs (i.e. a flat face screw with just a pin hole in it) - but if it is if you search the wedge forum for OZ I'm sure you will find a recent thread on how to get them off.
Had the same probelm on mine, basically a small allen key, or similar, wedged in the "dimple" and a flat blade screwdriver in the slight recess - then turn screwdriver against allen key and "bingo " ....
Had the same probelm on mine, basically a small allen key, or similar, wedged in the "dimple" and a flat blade screwdriver in the slight recess - then turn screwdriver against allen key and "bingo " ....
Gassing Station | Griffith | Top of Page | What's New | My Stuff