what window wiper motor
Discussion
Its a Lucus unit used in 100s of applications. @Adrian throws strops that the motor capacity is TVR specific. There was a thread a little while ago (maybe on the Chim side) about this. Gearbox / tubes ... are all available it depends whether you want to rebuild the one you have / what the problem is ....
Dave
Dave
richtvr said:
it stop wiping half way though a cycle gave it a push and it made it back but i just hasn't got any guts now wont even move unless you lean over and help
rich
rich
Have you tried soaking the windows. My intermittent is the same as when they are nearly dry there is too much resitance and the motor stops.
Are you up to speed now Mr V???
FFG
NO!!! It was always going to be hard, what with the factory history. but I AM going to get there.
OP Test the pinions and rack by removing the arms/remove the tubing nut from the ferrule and the gearbox cover screws then disconnect the rack from the connecting rod and manually push and pull the rack operating the wiper pinions, this should spin both the pinions in a smooth action.
Adrian@
FFG I have a slave now!
OP Test the pinions and rack by removing the arms/remove the tubing nut from the ferrule and the gearbox cover screws then disconnect the rack from the connecting rod and manually push and pull the rack operating the wiper pinions, this should spin both the pinions in a smooth action.
Adrian@
FFG I have a slave now!
Edited by adrian@ on Monday 16th April 23:15
Gassing Station | Griffith | Top of Page | What's New | My Stuff


