Sticky gear change resolved.

[fastandcurious]

A couple of weeks ago I reported on here how my gear change had become sticky when hot. Several other PHers said they had the same. Recomendations came in to change the oil and lubricate the linkage. Doing these things didn't help much but obviously did't do any harm. So I decided to bleed the clutch. I took the cap off the master cylinder and no fluid. I must be running on what little was left in the pipe! Luckily most of the fluid had dripped behind the carpet instead of on it. Straight on the phone to Racing Green and two hours and £60 later, with help from my missus holding the other side of the bolts through the bulkhead, I had my new master cylinder fitted. What a difference!

Edited by fastandcurious on Wednesday 6th June 09:40