Goodbye indicator repeater wiring.

[Aussie John]

I have managed to lose the wiring inside the front wings, unable to fish it out with a coathanger, how can I get it out? There doesnt appear to be an access panel in the footwell, any clues? John.

[Jay Ayegees]

Just have to stick your arm out the window.

[spend]

I have passed new wires from the dash to the front wing by pushing them from the dash/windscreen access hole and then fishing with a coat hanger thro the repeater hole... You may need to wiggle the harness from the dash end, or alternatively lift / wiggle the loom behind the headlight where it goes over the wheel arch.

Dave

[Aussie John]

Thanks Dave, I guess its one of those crap jobs, John.

[spend]

Just remembered....

The repeater loom spurs off the main loom behind the hole, it will have fallen down from here. You may be better 'trawling' for the joint to the rear rather than trying to get the end from down in the depths IYSWIM. Give me a shout if that was'nt very clear, got to rush.

Dave

[Aussie John]

Hi Dave, I soldered wires to a small bulb and dropped it through the hole, retrieved both but the nearside was a s*d, full of foam rubber and other things, alls well that ends well, thanks, John.