GKN Diff advice

[adam_rbts]

Anyone ever stripped a gkn diff before or at least changed oil seals? Just looking for confirmation on how the output shafts are held in. They should be on c-clips but just thought I'd get a second opinion before I start tugging..

[Dave PORTER]

Lube the circlips well before trying to remove, most have had oil leaks in that area before so aren,t that tight.Tap the pins to rotate the circlips in the groove before trying to remove.Once the pins are squeezed together and the circlip closes equally all round, a swift tap on the flange with a copper hammer will bring out the whole shaft , 07850 304332 if you have any problems......

[adam_rbts]

Yup, they're out.. cheers!