Could someone post me some pics please ?

[FFMan]

I'm trying to cure the wind whistling from the passenger door side. However the drivers side and the passenger side seals on top of the window line (i.e. on the roof panel) sit differently each side.

Should the little lip part of the rubber sit against the roof panel or get squashed under the glass when you close the door ?

If anyone can spare time to post some close-ups of how this should be that would be really useful.

Can you buy the rubber seals still ?

thanks

[adyw]

Try clevor trevor
http://www.clever-trevor.net/tvr-part-category/2-b...
if I have done this wright it should take you straight to the seal. I bought a set a few weeks ago fit fine.

[Simpo Two]

FFMan said:

Should the little lip part of the rubber sit against the roof panel or get squashed under the glass when you close the door ?

I don't have a suitable photo but the rubber strip that runs on top of the windows must be *on top* of the glass, not tucked behind it, or water will get in. If you see it trapped behind the glass, the easiest fix is to lower the window a little, then raise it again.