Lightest griffith wheels...
Discussion
panic said:
Chimjunkie said:
Could be the SP12's like on my profile?
They're nice, what's the weight compared with the standard griff wheels? sizes you've got there?What carbon one off parts you've got? have a link to the producer?
Thanks!
The only TVR carbon fibre parts i currently have moulds for are Chimaera lower dash pod and centre console. Thinking about doing mirrors soon. Have also made Carbon and LED indicator lamps! Going on my car this week as soon as it has the front end sprayed...
The wheels are great. Really modernise the look of the car. 15/16" combo looking a bit dated (IMO) and too dificult to get tyres for now.
rev-erend said:
Don't think a bigger wheel and tyre combo will be lighter that a smaller one.
I weighted my 15 inch Oz split rims (225/50 *15) 17.5 kg
and 18 inch spiders (245/40 *18) from my T350 21KG.
That's actually quite a lot of unsprung weight..
I have a very lightweight (minilite replicas) on my '77 corvette, the size of the rim os 11.5x15 and tires are 325/55/15, altogether for a weight of 19 kgs...tires are the race bias ply hoosiers (not radial) and that is also a huge save on unsprung weight.I weighted my 15 inch Oz split rims (225/50 *15) 17.5 kg
and 18 inch spiders (245/40 *18) from my T350 21KG.
That's actually quite a lot of unsprung weight..
I was tempted to make a custom version of this very same wheel for the griffith, i think it could be below 15 kg, included tires.
What do you think?
JR said:
Chimjunkie said:
Remember that 17/18 inch rims are a larger wheel so the wheel weight may not be too dissimilar to the griff wheels. But the tyres will be much lighter so the whole combo should be lighter.
You haven't weighed anything have you?
panic said:
rev-erend said:
Don't think a bigger wheel and tyre combo will be lighter that a smaller one.
I have a very lightweight (minilite replicas) on my '77 corvette, the size of the rim os 11.5x15 and tires are 325/55/15, altogether for a weight of 19 kgs...tires are the race bias ply hoosiers (not radial) and that is also a huge save on unsprung weight. To achieve a lower weight than your minilite proposal is going to be difficult, esp if they are magnesium ones.
JR said:
Chimjunkie said:
Remember that 17/18 inch rims are a larger wheel so the wheel weight may not be too dissimilar to the griff wheels. But the tyres will be much lighter so the whole combo should be lighter.
You haven't weighed anything have you?Podie said:
JR said:
Chimjunkie said:
Remember that 17/18 inch rims are a larger wheel so the wheel weight may not be too dissimilar to the griff wheels. But the tyres will be much lighter so the whole combo should be lighter.
You haven't weighed anything have you?
Chimjunkie said:
JR said:
Chimjunkie said:
Remember that 17/18 inch rims are a larger wheel so the wheel weight may not be too dissimilar to the griff wheels. But the tyres will be much lighter so the whole combo should be lighter.
You haven't weighed anything have you?This is getting well away from what the OP requires though, say http://www.comp.co.uk/wheels/wheels.asp?size=15%22... or
http://www.comp.co.uk/wheels/wheels.asp?size=16%22...
JR said:
Chimjunkie said:
JR said:
Chimjunkie said:
Remember that 17/18 inch rims are a larger wheel so the wheel weight may not be too dissimilar to the griff wheels. But the tyres will be much lighter so the whole combo should be lighter.
You haven't weighed anything have you?This is getting well away from what the OP requires though, say http://www.comp.co.uk/wheels/wheels.asp?size=15%22... or
http://www.comp.co.uk/wheels/wheels.asp?size=16%22...
I have also just changed a set of standard wheels over to Team Dynamics on a Lotus and the larger Team D wheels did feel lighter. Not arguing with you, but my opinion can only be based on my thoughts and experiences...
Chimjunkie said:
Didn't mean to mislead. Just applying what seems logical.
OKChimjunkie said:
The SP12's are minimal in design and advertised as lightweight.
Lightweight is relative. 18" TVR spider vs 18" SP12 or 15" Estoril vs 17" SP12?Chimjunkie said:
The tyres surely would be much lighter? The side wall is much less so surely lighter? If not then thats as impressive as getting 40g of fat in a sandwich 
For tyres of a given diameter and width the weights are roughly the same - the larger wheel dia/lower profile tyres are actually very slightly heavier (a few %) The reason is the reinforcement in the tyre. I'll bow to your greater sandwich knowledge as I have no idea how much fat one should expect or be surprised about.
Gassing Station | Griffith | Top of Page | What's New | My Stuff





