Speedo & Brake prob's
Speedo & Brake prob's
Author
Discussion

weg2727

Original Poster:

50 posts

278 months

Monday 22nd September 2008
quotequote all
Hi
'92 400. my speedo is stationary at 25mph when cruising or if I go a bit faster it goes to 80 mph and I know I'm not doing 80 mph, I find myself going by speed cameras at a snails pace.

Also, My brakes work fine, but when ever I press the brake pedal I get an almighty klunk, I'm finding this a bit scary.

I'm a little worried about gaining a few points and trying to use the handbrake to stop.

Cheers Stu.

Barreti

6,689 posts

267 months

Monday 22nd September 2008
quotequote all
On the brakes question, have you checked to make sure your calipers are still secured by both bolts, and that your wheel nuts are tight?

Mark_G

195 posts

236 months

Wednesday 24th September 2008
quotequote all
Had a similar problem recently with my '98 Griff 500 - speedo would not go above 80 mph no matter the gear / revs. Ended up swapping for a refurbished speedo which has solved the problem - seems that it's not uncommon that the cogs (?) inside the speedo unit jam/slip. BTW, I check with the MOT people re the fact that the mileage now on the dash is not consistent with the MOT records / log book - they weren't concerned! I have kept a record of the mileage on the original unit I removed and the mileage on the new unit that went in - so that the actual mileage on the car can be calculated at a later date.

In the mean time, until you can find a replacement unit, try to work on driving by the RPM - the ratios on speed / rpm are pretty simple -though I can't recall the ratios as I type this... getmecoat
Have fun learning while driving /m

weg2727

Original Poster:

50 posts

278 months

Wednesday 24th September 2008
quotequote all
Thanks Mark, Where would be the best place for a replacement speedo or in my case I would really like to get it repaired if possible because it's '92 Griff with only 28k on the clock.
Cheers
Stu

Mark_G

195 posts

236 months

Thursday 25th September 2008
quotequote all
I got mine through Leven (Basildon) - I think they have contacts with a company in Wales(?) Give Jules and Simon a call, they'll be more than helpful. /m