Discussion
http://www.prwood.webeden.co.uk/#/splitroof/452433...
These guys were showing one at Rockingham last year.
IIRC it was £360
These guys were showing one at Rockingham last year.
IIRC it was £360
Uncle Fester said:
http://www.prwood.webeden.co.uk/#/splitroof/452433...
These guys were showing one at Rockingham last year.
IIRC it was £360
From the website....These guys were showing one at Rockingham last year.
IIRC it was £360
(This roof will be able to fit models : GRITTITH and CHIMAERA.)
So no good to me as I dont own one of them.
True, I emailed them asking to be kept up to date with developments. Nothing heard. I might take a run up there soon just to see how it's going.
The reason I didn’t buy one at Rockingham was I didn’t like the exterior finish.
They had moulded it with an exterior that looked like a poor imitation of 1970’s vinyl roof.
They didn’t offer a finish to match the original. They suggested that I replace the rear hood and cover their panel with matching fabric at the same time. So I was waiting until I need a new roof, probably this winter.
What I really wanted was a finish like the carbon fibre look that my original roof has on the inside. But I wanted the carbon fibre look inside and out. As this hasn’t got marked in fourteen years it must be ok. It wouldn’t suit everyone, but I have a black Griff and I think a Carbon fibre look roof would look right on my car.
The reason I didn’t buy one at Rockingham was I didn’t like the exterior finish.
They had moulded it with an exterior that looked like a poor imitation of 1970’s vinyl roof.
They didn’t offer a finish to match the original. They suggested that I replace the rear hood and cover their panel with matching fabric at the same time. So I was waiting until I need a new roof, probably this winter.
What I really wanted was a finish like the carbon fibre look that my original roof has on the inside. But I wanted the carbon fibre look inside and out. As this hasn’t got marked in fourteen years it must be ok. It wouldn’t suit everyone, but I have a black Griff and I think a Carbon fibre look roof would look right on my car.
Griff Boy said:
surface and design in Blackpool are close to producinga split roof commercially. Different idea to most as well!
Yea that's my roof design and we've cut it accross the panel as opposed to back to front. The idea was to make the seal easier to make water proof and enable you to put the panels on top of anything that was in the boot. Like everything, not as easy as it sounds in theory as we're trying to make something that's repeatable rather than a 'one-off'.
V8 GRF said:
Yea that's my roof design and we've cut it accross the panel as opposed to back to front. The idea was to make the seal easier to make water proof and enable you to put the panels on top of anything that was in the boot.
Like everything, not as easy as it sounds in theory as we're trying to make something that's repeatable rather than a 'one-off'.
Front to rear split seals very well thank you Like everything, not as easy as it sounds in theory as we're trying to make something that's repeatable rather than a 'one-off'.
& fits nicely on top of a loaded boot 
Del 203 said:
V8 GRF said:
Yea that's my roof design and we've cut it accross the panel as opposed to back to front. The idea was to make the seal easier to make water proof and enable you to put the panels on top of anything that was in the boot.
Like everything, not as easy as it sounds in theory as we're trying to make something that's repeatable rather than a 'one-off'.
Front to rear split seals very well thank you Like everything, not as easy as it sounds in theory as we're trying to make something that's repeatable rather than a 'one-off'.
& fits nicely on top of a loaded boot I didn't say the front to back cut doesn't seal or fit it's just another solution that appeared to make easier to seal. 
Gassing Station | Griffith | Top of Page | What's New | My Stuff