WINDOW REGULATOR.......... EARLY GRIFF

[3024E]

Can anyone tell me what car manufacturer or even better the model of which TVR robbed it from (VAUXHALL/FORD/CITROEN...ETC????) or are they purely tvr part only.

My motor works fine but i am assuming the geared teeth have gone, is this a common fault??????


Many thanks in advance......


P.S. I HAVE A 1992 4.0 250 BHP MODEL.

[griffdude]

Sorry, can't help with a direct X ref.

Might be worth contacting the parts dept at TVR Power, It's a suprise what they've got lurking on their shelves. Otherwise it'll be the Clevor Trevor/breakers route unless anyone has a better suggestion....

[V8 Animal]

Ebay have some listed today.
V8 Animal

[mack]

Spookily, I fitted a replacement one in my Griff only last night!!

I've got two u/s ones sat on my bench - I'll have a look for part numbers, etc for you later

[AntonyJ]

There are some on Ebay now from Peninsular. From the cars doors I have had my arms in , they are all the same.

[mack]

Andy,

Right, they're both n/s units marked up as follows:

Bosch FPE 12V 0 130 821 069
TVR Part No: WM-M0104

One of them is made in Germany and the other one in Mexico so, I guess, that probably means that they're off a Ford?

(Thinking about it, I've replaced five of these between my two Griffs over the years and it's always been the n/s one that's gone )

I've just twigged - are you Bernice's other half by any chance?
If so, glad you got sorted with a car - feel free to call round for a chat anytime.

If you want to take one of the motors round to the breakers for comparison, feel free. I used Douglas Valley last time but they charged £50, as it's a TVR part , I'm sure Metro Salvage will probably be cheaper as a Ford part.

Alternatively, you can use one to repair your own - I'll give you a hand to replace it , if you like

mack

[3024E]

YES ITS ME DAVID,



Been round to your house a few times in the griff, sadly my dad died recently so ive been very busy.

Sorry to see your cars going i also am having house extentions and cant just buy yours now....

Why not take mine and some £££££ so you have best of both worlds?????? couldnt see you living without a griff as your passion is so high for the cars.

Will give you a bell soon

Andy

Edited by 3024E on Tuesday 2nd December 21:44

Edited by 3024E on Tuesday 2nd December 21:48

[3024E]

DAVID, Strange it is,


but if i undo the mounting bolts turn the motor 45 degrees it works, but then cant bolt it back any where to hold it.....weird.!!!

Need to pick your brains about a few things as well, hope you dont mind

ANDY BOOTH

[mack]

No problem Andy - I've now come off the boats, and am back working shoreside on regular shifts, so you'll be able to catch me at some stage
Sorry to hear about your Dad