Roof rivets

[HRG]

What size should the rivets that hold the seal onto the folding section of the roof be? I can't seem to find any long enough locally so I need to order some up online.

[Ballistic Banana]

Last I used were

Stanley 0-69-845
where

A=4mm
B=9.5mm
C=13mm

Used with a washer too as the whole in the FG had enlarged its self over time

Washer 4mm hole also stanley 0-69-861

All from B&Q

I have plently left over if you want me to send some over can post in Morning

BB

[HRG]

I should be able to get some locally thanks I seem to be in B&Q every other day decorating at the mo

If I get stuck I'll give you a nudge if that's ok

[HRG]

Well what a tt that turned out to be... In the end I peeled the trim back and bit the bullet big time. Old holes filled with Loctite Repair Express Epoxy Putty (Think it's called Biond N' Lock now), sanded down so I retained the original profile and then redrilled 3.2mm.

That ain't going anywhere now, for me it was pissing in the wind trying to reuse the original holes.