Discussion
Hi all
Had my 500 for a couple of months now, and I am loving every minute of it !!
I do have one small problem however ~ the passenger side electric window has stopped working. I can hear things going on in the door, but I need to get the trim off to have a look.
How do I get the door trim off ??!! Help !
Thanks
Chris
Had my 500 for a couple of months now, and I am loving every minute of it !!
I do have one small problem however ~ the passenger side electric window has stopped working. I can hear things going on in the door, but I need to get the trim off to have a look.
How do I get the door trim off ??!! Help !
Thanks
Chris
you need to remove the door speaker, then put your hand down inside towards the front of the door, here you should find a 8mm nut, if you are lucky someone may have done this before and replaced it with a wing nut, remove this, and then going toward the back of the door you will find 2 more nuts, one is near the bottom of the verticle window guide, the other a little further along.
on the outside of the panel, remove the 2 screws that secure the red reflector, then gently pull the bottom of the panel away from the door, then lift upwards to remove the lip at the top that sits over the window frame.
I amy have forgotten something, its a while since I did this on mine, hope it helps
clive.
on the outside of the panel, remove the 2 screws that secure the red reflector, then gently pull the bottom of the panel away from the door, then lift upwards to remove the lip at the top that sits over the window frame.
I amy have forgotten something, its a while since I did this on mine, hope it helps
clive.
Edited by clive f on Saturday 3rd January 16:08
Pop the ashtray out and there is a self tapper behind it as well..
Guess Clive doesnt have ashtrays, just leaves his window down
I find it easier to put my arm in with ratchet in hand ready, then point your arm up on the way in and then lower it to feel for the nuts.
Helps if you wear a long sleeve work jacket or something, its not nice in there(itchy and scratchy show)
Ant
Guess Clive doesnt have ashtrays, just leaves his window down

I find it easier to put my arm in with ratchet in hand ready, then point your arm up on the way in and then lower it to feel for the nuts.
Helps if you wear a long sleeve work jacket or something, its not nice in there(itchy and scratchy show)
Ant
I had exactly the same problem, I found this link to be a great help.
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
Gassing Station | Griffith | Top of Page | What's New | My Stuff


