Pre-Cat Dashboard vents

[Green Meanie]

Hi

Just doing a referb on my dash board and found that there are no pipes installed to connect my dashboard vents(the two either side of the cassette player).My questions are:

What size of flexible pipe is used.
How is it routed as there seems to be very limited space to install it (has someone taken a picture when their dash was out showing the pipework)

Does the pipework have a TEE in it so one pipe supplies both vents

Any help gratefully received.

[LordGrover]

Not a great photo I'm afraid, but it may show something of interest:



BTW - mine only blows cold air onto my gear-stick hand all winter and hot air all blooming summer so you aint missing a lot. I'm not taking the fecking thing out again for a while either. PITA.

[Barreti]

My only photo is about as bad as LG posted, so I won't bother.
The two vents either side of the cassette aren't connected to each other though. I think the left vent is connected to the vent the other side of the glove box and the right vent is fed from a hole in the bulkhead directly behind it.

Looks like another case of whatever fits though, because where LG has that black flexible hose I have what looks like the pushfit bends and pipework from under the kitchen sink.

[LordGrover]

Found some more but no better:

[Green Meanie]

THANKS GUYS

[Hoover.]

mine looks just like LordGroovers..... however when I first got it they were not connected to the dash and the hoses just pushed out the way at the back.