Rear speaker Wires
Rear speaker Wires
Author
Discussion

daveb500

Original Poster:

391 posts

216 months

Saturday 17th October 2009
quotequote all
I've got a 98 Griff 500 and am trying to fit some rear speakers. I thought (possibly wrongly) that TVR put speaker wires in ready but I can't find any. I have found some unused wires but they aren't speaker wire. I tried them on some old speakers and there was no sound. I've checked the back of the radio and that end seems to be wired for 4 speakers. Any ideas?

Johno

8,593 posts

311 months

Saturday 17th October 2009
quotequote all
Often bundled together around the fuel filler neck . . . Also you cshould be able to check whether there is wiring by looking in at the panel beside the passenger seat below the seat belt mount as most (all?) the rear loom goes through the passenger side to the rear of the car...

S4CJO

429 posts

288 months

Sunday 18th October 2009
quotequote all
Look behind the panel on the passengers side where you have access to the door solenoid. Off top of my head they are grey with a trace cpolour either black or red?

scorcher

4,125 posts

263 months

Sunday 18th October 2009
quotequote all
Just run some more.Won't take much more than an hour and then you can use some decent cable aswell.