TVR Logo wheel centre Badge

[FlipFlopGriff]

I'm about to refurbish a set of OZ multi spokes and want to know if the centre badge can be obtained from anywhere. The badge has a black background with silver TVR logo and is mounted on the back of a slightly domed plastic front which is scratched. As I about to spend a small fortune on the wheels it would be a shame to ruin them by putting the old badges back on - one is damaged anyway so I would need at least 1 replacement.
FFG

[dougal]

If you get them done (I assume you mean the split rim multispokes?) and find them, I couldn't be nosey and ask where and how much as I have got to do the same.

[griffter]

Me three.

[FlipFlopGriff]

Maybe we could get a discount for 12!
Anyone else refurbing then? If so where?
I am going to Renowheel in Bridgend.
FFG

[jon h]

I can make them here at work. I replaced my original black badges on my OZ wheels with pink ones to match the car colour...

... and before we start on the whole pink car debate, I have had nothing but favourable comments!

These were for personal consumption, but I am not sure what the position would be in terms of using the TVR logo for a "production run" I can make enquiries if there is interest, especially if TVR no longer supply a badge to the right dimensions for the OZ wheels, which I suspect to be the case.

Jon H

[FlipFlopGriff]

Jon,
Does that include the domed plastic piece or is that just for the TVR graphic as on one of our the plastic is split so couldn't be reused? If so what sort of price are we looking at and can we spec colours?
Our Griff is pearl white with dark green interior so might go for something like white TVR on green background.
FFG

[jon h]

The entire badge, including the "dome" is one piece. We can do the whole thing, with the possibility of some custom colours. I will have to look into costs.

Jon H

[glena]

FlipFlopGriff said:

Maybe we could get a discount for 12! Anyone else refurbing then? If so where? I am going to Renowheel in Bridgend. FFG

Don't forget me!

[FlipFlopGriff]

Glen,
Didn't think you were having the centres done?
FFG

[glena]

FlipFlopGriff said:

Glen, Didn't think you were having the centres done? FFG

Your right! another senior moment, silly me

[green griff]

jon h said:

The entire badge, including the "dome" is one piece. We can do the whole thing, with the possibility of some custom colours. I will have to look into costs. Jon H

Count me in too!. My OZ alloys are pretty good, but the centre badges are scuffed.

[FlipFlopGriff]

Jon,
Any update on costs as they go in soon and I need to know how careful I need to be taking the old ones off.
FFG

[jon h]

Looking like about £25.00 for a set of 4 plus VAT & postage, assuming I can do a small run of a standard size, for example the OZ format. up to about £35.00 per set for a one of custom size/colour

Jon H

[wooly]

Could try these peeps - www.auto-motif.co.uk £ 12.00 for 4 stick on resin domed badges ( inc. vat & pp )

Found while doing a search for wheel badges some while back, I have lost one badge but still have the black centre piece. Have yet to order, anyone require just one or two badges ?.

>> Edited by wooly on Monday 2nd February 09:08

[tamago]

the above link only opens up picnic tables and garden stuff???

i will need some after losing one during an "off" at Donington...

[FlipFlopGriff]

Try deleting the crap at the end of the address so it is just .co.uk and then you can see whats on offer.
FFG

[wooly]

Apologies, had put an extra full stop at end of link - should work now. Apparently they can change the colours if required.

[FlipFlopGriff]

Yes. I asked that too.
FFG