powerflex bushes help

[hiltonig]

Ok chaps just want to check the bush that sits in the rear adjuster brackets has a metal top hat, since it has knackered the plastic spacers I need to check does the unit use a thin washer under the metal top hat and a thick washer at the other end ?

just looked through the pic I took before dismantle and one side has two thin washer the other one thin one thick !!!

Q must know ??

your help would be greatly received

Edited by hiltonig on Monday 12th April 20:04

Edited by hiltonig on Monday 12th April 20:11

[Ant.]

hiltonig said:

Ok chaps just want to check the bush that sits in the rear adjuster brackets has a metal top hat, since it has knackered the plastic spacers I need to check does the unit use a thin washer under the metal top hat and a thick washer at the other end ?

just looked through the pic I took before dismantle and one side has two thin washer the other one thin one thick !!!

Q must know ??

your help would be greatly received

Yes.A thin washer with the tophat and a normal one the other end.

[hiltonig]

Like this ?, this is how I have reassembled it , its not arf tight though ! thin one end thick the other, i remember that pic Q !!

Edited by hiltonig on Monday 12th April 20:39

[hiltonig]

yes for some reason my thin ones were black, I have thumped the bracket open a little and tapped in the adjuster, just abit bit worried when its all nipped up that the thick spacer is going to compress up against the adjuster, I know its hard to explain as the metal tube poking out of the end of adjuster didnt look as if it had enough length to accomodate the spacer.