Need help ID'ing some calipers

[Mark_S_24]

Hi,

I've just bought some 2nd hand calipers for my Chim as it's still on 240mm & I do quite a few track days.
The person I bought them from never used them but he thought they were from a Griff (hence posting here)
As you can see from the pic they need a good clean up & I want to give them a service too.
So can you ID them so I know what repair kit to buy and pads and braided hoses too.





I can't remember what size the disks are on the front as the couriers messed up & I haven't got them yet, but I think the may have been 283mm?

Also the fronts seem to have 37 stamped near the clip for the bleed nipple, also looks like VL-U ? and maybe 079 but it's difficult to tell with the corrosion (and the other caliper is worse)

The rears have 67321, 052/4 (051/4 on the other side the / might be an A?) & 8282 stamped on them

Hopefully they will fit under my standard wheels even if I need spacers &/or a mounting bracket.


Cheers in advance for your help
Mark

[matoakley]

Hi

My advice is dont bother doing them up. They are off any ABS seria and reconditioned from unipart at £25 last time i bought some!

discs are about £15. cheap motoring

Matthew

[matoakley]

Sorry Rears are Escort cosworth

again cheap as chips dont bother with second hand.
You will need to change bearing carrier if changing from solid rear discs, and again I believe its the same as later seria. I bout them for £20 from scapper

[peaktorque]

If you want to do the 283 mm conversion at the front then you need some of these big boys:-



A found on Granada Cosworth, 4x4 Sierra Cosworth or Mondeo V6.

Casting number 888 and 887 are stamped on them.

I got these off of ebay complete with braided hoses (which I've already got, so don't need) and (slightly used) red stuff pads for £50 (they don't come up often though), just awaiting a lick of paint