Rear Toe

[steve-V8s]

Any idea what the thread on the Rear toe adjusters is. Best guess I can come up with is 1 inch UNF 12 tpi.

While we are at it what is the general preference for rear toe, does about 1 degree (toe in obviously) per side sound about right

[spend]

Just less than 1mm each wheel is the only sensible 'one' I can think of, 1 deg sounds far too much.

Normally 5-6 minutes per wheel toe IIRC, I always feel you can use less at the rear if you have more positive location (harder poly bushes or rose joints).