Good results from sorting the air flow out
Discussion
This is my RR graph from the growl last year. 269bhp no engine mods but had just had a new cam (standard 5.0ltr)
Since then I have added act smooth bore induction pipes, carbon trumpets and red Magnecor KV85 leads I have also set the pre-loads which were a touch out(smallest shim) also sorted out a none functioning vacume advance. So I bobbed over to Roar stuck on the same Dyno and here are the results.I got them to stick the old results Red on aswell. As you can see they are identical until it gets to about 3500rpm.
Apparently I was running a touch lean so Ian stuck me an adjustable regulator on. So hopefully I may have a couple more ponies at the Growl.Certainley seems a little better.
Getting the air flowing better is certainly worth the relativly small investment
Chris
Since then I have added act smooth bore induction pipes, carbon trumpets and red Magnecor KV85 leads I have also set the pre-loads which were a touch out(smallest shim) also sorted out a none functioning vacume advance. So I bobbed over to Roar stuck on the same Dyno and here are the results.I got them to stick the old results Red on aswell. As you can see they are identical until it gets to about 3500rpm.
Apparently I was running a touch lean so Ian stuck me an adjustable regulator on. So hopefully I may have a couple more ponies at the Growl.Certainley seems a little better.
Getting the air flowing better is certainly worth the relativly small investment
Chris
Edited by chris52 on Saturday 10th July 21:38
Gassing Station | Griffith | Top of Page | What's New | My Stuff