Steering gaiters

[carsy]

Need two new steering gaiters for a `92 manual rack. Anybody know what will fit.

[Loubaruch]

If you cannot match the originals most motor factors will stock ones with a universal fitting.

[carsy]

Ye thanks for the reply. I have purchased a pair from one of the well known TVR suppliers but they aint going to go on. Looks like i will have to try and make do with some of the universal fit ones.

[boz]

Is this the problems you have?
These were sold as manual rack gaiters . . .


Swapped them for power steering gaiters which went over the casting, but were a little too short (QG1062 from Quinton Hazell)i could do with finding ones about 20mm longer.

[Slade Alive]

They're Ford Ka or Fiesta if memory serves. Simon - Griff Pages - has the correct info. If I remember I'll post back the QH part number as supplied from Andrew Page.

[carsy]

boz said:

Is this the problems you have?
These were sold as manual rack gaiters . . .


Swapped them for power steering gaiters which went over the casting, but were a little too short (QG1062 from Quinton Hazell)i could do with finding ones about 20mm longer.

Yep. exactly the same. I`ll wait and see if Slade Alive comes back with the correct ones.

[Slade Alive]

carsy said:

I`ll wait and see if Slade Alive comes back with the correct ones.

Pressure then, lol!



Griff 500 93/4 manual rack,

Quinton Hazell product part number QG 1227 - early Fiesta / 1996 on Ford Ka

[carsy]

Thanks mate i`ll go and get a some.