Short Throw Shifter for T5 Griff
Short Throw Shifter for T5 Griff
Author
Discussion

Ryan23

Original Poster:

33 posts

187 months

Thursday 3rd March 2011
quotequote all
Hey Guys -
I did a search but came up fruitless. The shifts are a bit too long in my Griff and I'd like to shorten it up a bit. Can I use a standard short shifter from any T5 or is the TVR box somehow different? I have a "Pro 5.0" shifter in my LS7 powered RX7 and the shifts are nice and direct. Pro 5.0 manufacturers a shifter for the T5 in the fox bodied Mustang. Same box minus bellhousing, right?

Thanks,

Ryan

Colin RedGriff

2,541 posts

286 months

Thursday 3rd March 2011
quotequote all
Not sure

The installation in the Griff uses a TVR modification to move the gear lever forward in the car so I don't think a standard short throw shifter will work.

You might be able to modify the linkage to improve the throw though. I guess anything is possible depending how mouch time/money you want to put in.


steve-V8s

2,924 posts

277 months

Thursday 3rd March 2011
quotequote all
While you are looking see if you can come up with a sequential T5 for less than the cost of a house.

Ryan23

Original Poster:

33 posts

187 months

Thursday 3rd March 2011
quotequote all
steve-V8s said:
While you are looking see if you can come up with a sequential T5 for less than the cost of a house.
The Japanese have that down to a science (just not for a TVR) smile. Pretty slick sequential shifter but it is a little pricey:


http://www.ikeya-f.co.jp/en/product_notice/sequen_...






dbv8

8,676 posts

249 months

Thursday 3rd March 2011
quotequote all
I thought the T5 was pretty quick on the changes already but i am interested in cutting these times to a minimum.

Ryan23

Original Poster:

33 posts

187 months

Thursday 3rd March 2011
quotequote all
Colin RedGriff said:
Not sure

The installation in the Griff uses a TVR modification to move the gear lever forward in the car so I don't think a standard short throw shifter will work.

You might be able to modify the linkage to improve the throw though. I guess anything is possible depending how mouch time/money you want to put in.
I'll have to take a peek and see how TVR fitted the linkage to the shifter. The "standard" T5 box uses a bolt in shifter mechanism and perhaps the TVR linkage could attach to that. I'm just not sure how much of a reduction in throw could be achieved by preserving the TVR linkage.



dbv8

8,676 posts

249 months

Thursday 3rd March 2011
quotequote all
Can we improve to a significant level on these gearchages

http://www.youtube.com/watch?v=FtDPBW4xtfc