Mpi Help Wanted

[mymini]

Need a bit of help !!!
I've just replaced my standard cam with a MiniSport MP2 fast road cam, the problem is the engine runs very hot oil temp 100*c, water temp normal. Local main dealer says engine running fine but if I take it on a 20 min run it boils the clutch fluid.
I'm sure the timing is out but I've set the timing marks as it says in the Haynes Manual.
I'm running a standard timing chain + an oil cooler.

As Much help would be appreciated.

[DanGT]

I would think that the tuning would have to be changed with that cam (I know some one hear will know in what way). I would start by contacting mini sport with info on the cam timeing ignition timeing and I would think that it is probably running leen. Hope this helps