Discovery 2 ACE leaks
Discovery 2 ACE leaks
Author
Discussion

300tdi

Original Poster:

33 posts

201 months

Monday 26th May 2014
quotequote all
Hi, just discovered a serious leak from pipes on offside just in front of the rear wheel. Q, am I wright in saying you can replace the whole system with standard anti roll bars? or am I wasting my time and should replace the faulty pipes?
Thanks Ian.

camel_landy

5,512 posts

213 months

Monday 26th May 2014
quotequote all
Just replace the faulty pipes.

It's easier and keeps the system original.

M

sunbeam alpine

7,249 posts

218 months

Monday 26th May 2014
quotequote all
I swapped mine to normal ARB's because the pipes cost quite a bit (and they're very fiddly to replace). The ride quality is definitely not as good as with the ACE system.

Bill

58,743 posts

285 months

Tuesday 27th May 2014
quotequote all
Does anyone know any good reason you couldn't use braided brake line instead?

xuy

1,116 posts

184 months

Tuesday 27th May 2014
quotequote all
sign up the the d2boysclub forum.

They will give you all the answers you need

sunbeam alpine

7,249 posts

218 months

Tuesday 27th May 2014
quotequote all
Bill said:
Does anyone know any good reason you couldn't use braided brake line instead?
I asked this when mine broke and apparently the pressure is too high.

topsparks

1,202 posts

277 months

Tuesday 27th May 2014
quotequote all
I have a complete set of ACE pipes spare they were taken off a low milage car I bought for spares, you will miss the ACE if you remove it.On my V8 with a 300 HP 5 litre it used to drift quite nicely!

Bill

58,743 posts

285 months

Wednesday 28th May 2014
quotequote all
sunbeam alpine said:
I asked this when mine broke and apparently the pressure is too high.
I guessed it might be that, but I'm still surprised it can't be done. Plenty of hydraulic applications use hoses. frown

sunbeam alpine

7,249 posts

218 months

Wednesday 28th May 2014
quotequote all
Bill said:
sunbeam alpine said:
I asked this when mine broke and apparently the pressure is too high.
I guessed it might be that, but I'm still surprised it can't be done. Plenty of hydraulic applications use hoses. frown
We've got agricultural sprayers and sugar beet harvesters which are driven hydraulically.

I asked the guy who presses our hoses as well as the (independent) LR specialist I use. Both were against it.

Bill

58,743 posts

285 months

Wednesday 28th May 2014
quotequote all
Cheers. The pump is attached with hoses though. frown

300tdi

Original Poster:

33 posts

201 months

Friday 13th June 2014
quotequote all
Hi, I have had the two rear pipes replaced at a total cost of £385, thanks for the advice. All is well now.
Ian.

g7jtk

1,844 posts

184 months

Friday 13th June 2014
quotequote all
I removed the pump and fitted the replacement idler pulley and belt the had ace turned off. It leaned a bit on tight corners but then I didn't drive it like a sports car