Removing wiper Motor 93 RR

[Tyre_Tread]

Friend's neighbour was getting impatient yesterday trying to get at the wiper motor on hi '93 Range Rover due to the wipers being slow.

He had part removed the dash and showed me the location of the wiper motor and said according to the Haynes manual that you also need to remove the bonnet and panel ahead of the acreen to get to the securing nuts.

Surely there is an easier way?

[BLUETHUNDER]

No. the easiest way is to remove the bonnet and scuttle panel. i have done this job myself many moons ago,and is the easiest way by far.

[Tyre_Tread]

BLUETHUNDER said:

No. the easiest way is to remove the bonnet and scuttle panel. i have done this job myself many moons ago,and is the easiest way by far.

once they are off from wher do you remove the wiper motor?

[BLUETHUNDER]

The wiper motor sits under the scuttle panel.

[Tyre_Tread]

BLUETHUNDER said:

The wiper motor sits under the scuttle panel.

so there was no need for him to rip out the dash from the inside then?

[BLUETHUNDER]

Tyre_Tread said:

BLUETHUNDER said:

The wiper motor sits under the scuttle panel.

so there was no need for him to rip out the dash from the inside then?

No. Once pulling the scuttle off you will see the motor sitting there.